Tips for simple cleaning of car radiators.

    First remove the thermostat. It can be started after repeated water addition. After the hot car is completely discharged, it can be completely discharged. Repeat this, and the residual oil can be ablated and brought out. If the oil is too much, it is recommended to use the alkali to adjust, participate in the waterway, and then release it after pneumatic. The consumption of alkali to clean the oil can be very strong, and it is not too corrosive to the initiator. After use, the tap water can be washed directly with the tap water.

About the maintenance skills of car radiator equipment.

1. Check the water level at any time during daily use. When adding water, slowly open the water tank cover, and the operator's body should be as far away as possible from the water supply port to prevent the high pressure steam oil from being sprayed out to cause burns.

2. In the winter, to prevent the icing of the core caused by icing, such as long-term parking or indirect parking, the water tank cover and the water discharge switch should be used to release all the water.

3. The effective environment of the spare radiator should be kept ventilated and dry.

4. Depending on the actual situation, the user should completely clean the radiator for one to three months. When cleaning, rinse with clean water along the reverse air inlet side.

5. The water level gauge should be cleaned every 3 months or according to the actual situation, the parts should be removed and washed with warm water and non-corrosive detergent.